• Uses multi-core processor design and an advanced MPPT control algorithm in an IP30 enclosure.
• SPWM Pure Sine Wave output. Low Harmonic Distortion (≤3%) suitable for industrial, scientific and medical applications.
• MPPT technology with efficiency up to 99.5%
• AC side / Utility side 2P circuit breakers inbuilt (reduces installation space and time)
• Battery temperature compensation function
• Extensive electronic protection
• Can deliver instantaneous Output Surge Power twice the device rated power.
• For Critical UPS Power Applications, inbuilt Relay Interface can activate an external power source (e.g. Auto Start/Stop Generator) when Battery voltage is critically low.
  

 

 

MPPT Solar Charge algorithm maximises conversion efficiancy up to 99.5%. Battery Charging function configurable to suit local environment preferences and reliabilty requirements in multiple priority modes:

• Solar charging priority over Utility (to balance low running cost with reliability)
• Utility charging priority over Solar (to maximise charge in cloud conditions)
• Solar only charging (to achieve lowest running cost)
• Utility & Solar combined simultaneous charging

Inverter DC-AC module uses SPWM to produce Pure Sine wave output suitable for residential and commercial / scientific applications.

AC Inverter Module can be configured to run on:

• Always Battery source. This creates a continously stable output for systems requiring UPS (Uninterrupted Power Supply), e.g. telecommuncation systems or medical devices, or for countries where electrical power is unstable.
• Utility Power as default. Example when a Boat is connected to shore power.
• Configure output Voltage between 230VAC and 220VAC, and frequency between 60Hz or 50Hz

Control and Monitoring : Large 4.2 inch inbuilt display with realtime opertional data. Control and Monitor the system with PC Software or Android App.

• Optional Communication Cable (USB to RS485) required for PC connection.
• Optional eBox-WiFi required for Mobile Phone.
• PC Software required (Download here).
  

 

Electrical Specification:

UPower Series / Model Number	3 KVA/ (UP3000-M3322)
System Battery Voltage (and Range)	24 V DC (21.6～32VDC)
Output Power (15min.)	3000W (Continous 2400W)
Max. Surge Power	6000W
Inverter Output Voltage / Frequency	220VAC±3%, 230VAC (-7%～+3%) / 50Hz/60Hz
Inverter Output Wave	Pure Sine Wave
Distortion THD	≤3% (12V or 24V resistive load)
AC Utility Input Voltage	160VAC～280VAC(Working voltage range), 170VAC～270VAC(Utility starting voltage range)
Max. Utility Charge Current	30A
Max. PV Open Circuit Voltage	92V
Max. PV Input Power	780W
Max. PV Charging Current	30A
Battery Type	Lead Acid (AGM / Gel / Sealed / Flooded) / User Custom Battery Voltage Settings (e.g. Lithium*, etc.)
Battery (Equalization/Boost/Float) Voltage	29.2 V / 28.8 V / 27.6 V
Temperature Compensation Coefficient	-3mV/℃, 2V (Default)
MPPT Tracking Efficiency	upto 99.5%
PC Connectivity Option	RS485 Interface
Inbuilt Relay Interface	Can drive resistive loads 125VAC /1A, 30VDC/1A. Relay triggered by battery voltage sensing parameters DON / DOF (See manual).

 

Environment Specification:

Operating Temperature Range	-20°C ~ +50°C
Relative Humidity	≤95%, N.C
Enclosure	IP30

 

Physical Specs:

Parameter
Dimension	444×300×126mm
Mounting Dimension	230mm
Mounting Hole Size	Φ8mm
Weight	9.2kg

 

Full Protection Functions:

PV Over Current, PV Short Circuit, Night Reverse charging, Battery & PV reverse polarity, Battery over discharge, Battery over heat, Battery over voltage, Load Short Circuit, Load Overload, and Device overheating. Note: To comply with IEC62109 requirement, connector for battery temp sensor is now located inside the unit.

CE, RoHS.

Box Contains:

• Hybrid Charger/Inverter
• DC Circular & Input Terminals
• Battery Input Fuse
• Environment Temperature Sensor
• Installation tools. Wall Template, Anchor Bolts and Screws.